By | 26 September 2020 | 0 Comments

Magicshine MOH 35




  1. Magicshine MOH35 intro
  2. Handling
  3. Build quality
  4. LED, Lens Bezel and Reflector
  5. Dimensions and weight
  6. User interface
  7. Batteries and charging
  8. Performance
  9. Conclusion
  10. Magicshine MOH35 for sale



Brand / Model Magicshine MOH35 headlamp
led Cree XPL2 LED, XD16-S2 warm LED, XQ-E Red LED
Lumens 1000 lm
Beam intensity 3600 cd
Battery config. 1*21700
Material Aluminum
Modes 4+3+3
Blinkies SPS
Reflector TIR optics
Waterproof IPX6
Review date September 2020


Magicshine, which is well known for their high-quality bike lights (and as you may remember the earlier reviewed  Magicshine MTL60 ) offers a large range of lights, from bike lamps for cycling, headlamps for hiking and running, to professional lighting such as tactical and Hunting lights

Since they are focusing on professional outdoor activities, headlamps are a large quantity of their division and should not be missed in their product line. I have been asked to test and review their latest released product, which is the MOH 35 headlamp.

At first, I was not very familiar with the brand, but I got very enthusiastic after the MTL60 review. I reviewed many lights, but this one made their promise come true and offers great quality.

Will the MOH35 surprise me again? Let's see if it is that good!


The Magicshine MOH35 arrived in the same type of handsome presentation box as the MTL60 came in, it has a fully printed design which gives that 'premium' feel.
It comes in a clear shrink-wrapped box. The box can be opened by lifting the top lid. When opened, the light is revealed together with the battery pack. Everything is held together by high-density black foam. Underneath the foam, there is black cardboard, and below the cardboard is the other accessories.

  • Headband
  • Headstrap
  • USB C cable
  • Cable clip
  • Light
  • Battery pack + clip
  • Manual


After taking the light out the box and assembling it to the headband (which I did without the manual obviously, and assembled it the wrong way around #facepalm) The first thing I noticed is the size, it's tiny!
It looks like a cute little light, the battery pack, on the other hand, is quite large.
The light itself comes with a molded (non-removable) partially spiral corded battery connection cord, which seems to be one of the heavier gauge type wires, and feels very sturdy.

What I like about the MOH35, is that the power plug has to be inserted into the battery pack. You can feel that the rubber of the plug seals the connection to prevent water or other debris into the battery pack and effectuates into the IPX6 rating.

The battery pack has to be attached to the headband by a slide-on clip, which feels durable but not too hard to operate.

The headband itself seems to be made of decent quality and comes with the reflective Magicshine silkscreen.

The adjustability seems to be very good, and the one thing that I was initially a little bit afraid of, was:
how will it feel, will the balance be good?

Since the battery pack sits at the back of your head and the light being relatively small, I was concerned that it would feel unbalanced. Or that due to the battery weight compared to the lightweight on your forehead the headlamp would feel annoying and unnatural.

While the battery pack is a bit heavy, it feels very well positioned at the back of your head! Since the battery sits lower, you won't notice it that much, while the weight spread on the front and back is not equal, it gives more comfort.

Compared to a Skilhunt H03 headlamp (which is way lighter) I still preferred the Magicshine MOH35 over it. Mainly because the light itself is so lightweight and therefore does not unintentionally slide, or intends to hop up and down while I moved around. Usually, when running or walking with a headlight the beam tends to vibrate, this one doesn't. This makes it more agile and offers more comfortability, simply because it has less moment of inertia since it's featherlight (on your forehead)

Operation of the light is very common, so if you are a bit familiar with lights, this one shouldn't be any problem to operate.


The quality of the Magicshine MOH 35 is great. The seal of the power plug to the battery pack feels like it could even be used underwater. I would be confident enough to try because it certainly does not feel like a cheap power plug.

In this section, I would usually disassemble the flashlight to judge the quality by the used materials and the overall build quality. This headlamp, however, cannot be disassembled so I can't judge the internals!
This could be a pro in this case.

The light itself has aluminum housing with milled fins in the back of the light to dissipate the heat.
The anodization did not show any imperfections and has a nice and even finish. Durability seems good, while I did not abuse it, I still could not find any evident markings after some rough handling.

All plastic parts feel good, with enough flexibility, it certainly does not feel like cheap plastic. The plastic feels more like some sort of ABS or PP.

Fun fact, the rubber switch cover even has a tiny Magicshine logo marked in it. The attention to detail is something Magicshine is good at. All these small details give a great first impression.


The Magicshine MOH35 uses a dedicated TIR reflector, which is proprietary since it's part of the design. As mentioned before it is not removable.

The three LEDs all have their TIR, with each having its shape.

The red LED has a small clear TIR reflector, that gives it a nice and even flood of red light.
I haven't used any red lights before, but they say it works well for outdoor activities at night, You won't lose your night vision fast and some animals are less sensitive to it. Most animals can see the red light, however.

The warm white light has a striped TIR that gives a horizontal beam shape, very much like car headlights with almost no light spill above and below the beam. According to Magicshine, there is the reading or low mode (proximity mode) that produces an even wider beam of dim and soft light, that can last up to 240 hours.

The cool white LED has the largest TIR optic with additional rings on the outer edge, and small protruding dots in the middle. I'm not sure what this is for, but my guess would be to eliminate any artifacts and to make a smooth and functional beam. (You need that with an XPL2 LED, because of its famous corona) Magicshine's specifications say it can produce 1000 lumens and a beam of up to 120 meters. A beam of only 120 meters is more flood than throw.

The light itself can be tilted to 60 degrees downwards.


  • Head height: 53.8 mm / 2.11 inches
  • Head width: 32 mm / 1.25 inches
  • Head depth: 40 mm / 1.57 inches


  • Light: 52 grams / 1,83 ounces
  • Battery pack: 109 grams / 3,84 OZ
  • Total weight: 200 grams 7,95 OZ

Size comparison with other headlamps.

On the photo's the MOH35 is compared to the well known (and my all-time favorite headlamp) Skilhunt H03

  • Skilhunt H03
  • Magicshine MOH 35


The UI of the MOH35 is pretty easy to use. Press and hold the switch to turn the light on (and enters the last used mode) and a fast double-click selects the color LED. A single click runs you through different outputs. While this is an easy UI, I don't like to Press and Hold for On or Off.

On the other hand, it is probably inevitable since it uses three LED's and there has to be an easy method to select each LED and operate it and to be able to select the desired output level

Modes: Low, Mid, High, Turbo Strobe, SOS

From OFF:

  • Press and Hold: On (last mode memory) 
  • Single-click: nothing
  • Double click: nothing

From ON:

  • Press and Hold: Power OFF
  • Single-click: next mode
  • Double click: next LED

Mode memory:

  •  Yes, it has mode memory 

Low voltage warning:

When you press the switch on the power pack, a green light or red light will indicate the battery status. turn the flashlight on, the indicator LED under the button according to the battery level. It'll turn off after 5 seconds unless the battery is below 15%.

  • Flashing red 24-1%
  • Solid red 49-25%
  • Flashing green 74-50%
  • Solid green 100-75%


  • There are no blinky modes for the white LEDs. The red LED has an SOS mode.

Lock-out mode: 

  • Not applicable


  • No PWM was detected


The MOH35 comes with an external battery pack that is placed on the backside of the headband. It includes a 21700 size, 4000 mAh battery, and can be used as a power bank!

It has a USB-C connection and can deliver 15W (3A). 3A is also the maximum allowed charging rate for this headlamp.

I tested it with several chargers and it seems to support USB C Powered Delivery (also known as PD) 

The LED indicator is located next to the USB port and allows the user to check its battery level. This LED indicator blinks green while charging.

The USB port, power check button, and the battery level indicator are all covered by a silicon rubber cover (with the standby and USB icon on it)

One funny thing is that the power level indicator can still be checked while the rubber is covering them.

(Did you notice the curved text near the power plug? I love that detailed engineering)


Leave a Reply

Your email address will not be published.Required fields are marked. *
Verification code